PLA is perfect for learning, but it softens in a hot car and fades in strong sunlight. When a print needs to survive heat, impact or years outdoors, makers turn to ABS and ASA. Both are tough, heat-tolerant plastics, and both behave best inside an enclosed 3D printer that keeps drafts out and warmth in. If heavier-duty printing is on your list, Black Friday is a smart time to make the move.
Why ABS and ASA Need an Enclosure
ABS and ASA print at higher temperatures than PLA, typically between 220 and 270°C, on a bed heated to around 100°C. As each layer cools, the plastic contracts. In an open room, a passing draft or a cool corner can make that happen unevenly, so corners lift off the plate and tall parts crack between layers. A closed chamber keeps the surrounding air warm and still, which lets layers bond properly and keeps parts flat. It also contains odors and reduces noise, which matters if the printer sits in a home office or bedroom.
It is also worth deciding which of the two plastics you will use more often. ABS is a strong, affordable all-rounder that sands and paints well, so it suits prototypes, enclosures and tool holders. ASA shares that toughness but adds resistance to sunlight and weather, which makes it the better choice for anything that lives outside. Many makers keep a spool of each, using ABS for workshop parts and ASA for the garden, garage or car.
Matching the Printer to the Job
For Most Home Workshops: Adventurer 5M Pro
This compact printer comes fully enclosed from the factory. The sealed chamber holds a consistent temperature for ABS and ASA, while internal and external air circulation passes through a HEPA and activated carbon filter that traps the vast majority of particles and fumes. It keeps the speed of the open 5M, with travel up to 600 mm/s, plus full-auto leveling, a built-in camera for remote monitoring and a 220 mm cube build volume. It also handles PLA, PETG, TPU and carbon-filled blends with the right nozzle.
For Engineering Materials: Creator 5 Pro
When parts need to be bigger, stronger or made from several materials, this enclosed four-toolhead printer steps in. Active chamber heating up to 65°C gives ABS and ASA the warmest possible environment and opens up nylon and fiber-reinforced plastics such as ASA-CF and PET-CF. It adds a 256 mm build volume, nozzles that reach 320°C, HEPA 13 filtration and monitoring of the door and chamber temperature.

For an Open Printer You Already Own: Enclosure Kits
If you already have an open-frame machine, an 3D printer enclosure kit is the most practical route to ABS and ASA.
- Enclosure Kit for AD5X: clear panels for watching prints, a tool-free fit on the AD5X frame, noise cut from about 65 to 55 dB, and protection from dust and drafts. Some parts are printed yourself from supplied files.
- Enclosure Kit for Adventurer 5M: includes all the non-printed parts needed to build an enclosed 5M, reduces noise and odors, and supports ABS, ASA and PC. Installation guides and model files are provided.
The Filaments
ASA
Often described as an upgraded ABS, ASA resists UV light, fading and aging, which makes it the go-to for outdoor parts such as garden fittings, signs and car trim. It prints at 240 to 270°C with the bed at 100 to 120°C.
ABS
A tough, impact-tolerant engineering plastic with good heat and chemical resistance, ABS is ideal for functional prototypes and end-use parts that will be sanded or painted. It prints at 220 to 260°C and benefits from drying before use.
Tips for Cleaner ABS and ASA Prints
- Let the chamber warm up for a few minutes before starting.
- Keep the door closed until the print has cooled to avoid cracking.
- Dry spools at 80°C before long prints.
- Use a brim on large flat parts for extra hold.
- Print a small test piece first when trying a new spool or color.
- Let finished parts cool fully on the plate before removing them.
The Takeaway
An enclosure is what turns heat-resistant, weather-proof printing from frustrating to reliable. With an enclosed machine or a kit for the printer you own, and spools of ASA filament, you can make parts that last outdoors and under the hood.
The printers, kits and filaments above are all from Flashforge. Its Black Friday sale until November 30 takes money off printers automatically, offers a 30-day price guarantee and discounts filament and accessories.
There are plenty more short, useful reads waiting on 2minuteread.
