Most 3D printers work well straight out of the box, but a few well-chosen extras make them quieter, more reliable and easier to live with. The right 3D printer accessories solve the problems owners run into most, from damp filament and lifting corners to worn nozzles and prints you cannot see. Black Friday is when these upgrades drop in price, so it is a great time to fill the gaps in your setup.
Quick Guide: Which Upgrade Fixes What
| Problem | Upgrade |
|---|---|
| Stringing and brittle filament | VDS Filament Dry Box |
| Warping, noise and odors | Enclosure Kit for AD5X |
| Prints not sticking or hard to remove | PEI Build Plate |
| Clogs and worn nozzles | Nozzle Assembly for Adventurer 5M Series |
| Hard to see the print bed | LED Strip for AD5X and AD5M Series |
| Keeping an eye on long prints | Camera Module for Creator 5 Series |
When Filament Absorbs Moisture
VDS Filament Dry Box
Filament pulls moisture from the air, and wet spools cause stringing, popping sounds and weak layers. This Ventilated Drying System has two independent chambers, each adjustable from 45 to 85°C, so two different materials can dry at their own ideal temperatures. It monitors humidity inside and removes moisture once it passes a set level. It works with every common material, from PLA, PETG and ABS to TPU, nylon and fiber-reinforced blends.
When Prints Warp or the Printer Is Loud
Enclosure Kit for AD5X
Turning an open printer into an enclosed one keeps drafts and dust away and holds a steadier temperature, which helps prevent warping and cracking with heat-sensitive filaments such as ABS and ASA. The kit cuts noise from around 65 to 55 dB, reduces fumes and fits the AD5X frame without tools, with clear panels so you can still watch every layer. A few parts are printed yourself from supplied files.

When the First Layer Lets You Down
PEI Build Plate for AD5X and AD5M Series
A fresh plate is often the quickest fix for adhesion problems. This dual-sided version has a textured PEI side for strong grip with easy release once it cools, and a smooth side that leaves a glossy, mirror-like finish on the bottom of prints. It is a handy spare for switching between finishes too.
When Nozzles Wear Out
Nozzle Assembly for Adventurer 5M Series
Nozzles wear over time, especially with abrasive or fiber-filled filaments, and a partial clog can ruin quality. A spare assembly makes swapping quick. Fine sizes add detail, while larger ones speed up big functional prints. Keeping a replacement nozzle on hand means a clog never stops a project.
When You Want to See and Track Prints
LED Strip for AD5X and AD5M Series
Bright, even lighting over the build plate makes it far easier to check the first layer and spot problems early. The strip installs on the printer’s existing mounts and also improves camera footage and time-lapse recordings, since the print stays well lit even at night.
Camera Module for Creator 5 Series
The Creator 5 series uses a camera for remote monitoring and time-lapses. A replacement module keeps that view working, so you can check on long prints from your phone.
Small Habits That Make Upgrades Last
Accessories work best alongside a little regular care. Wipe the build plate with warm soapy water every few prints to remove skin oils that weaken adhesion, and avoid touching the printing surface with bare fingers. Store opened spools in the dryer or a sealed box rather than leaving them on the printer for days. Check the nozzle for buildup now and then, and change it at the first sign of under-extrusion rather than waiting for a full clog. If you have an enclosure, give it a quick dust out every month and keep its panels clean so you can still see the print clearly. These few minutes of care help every upgrade keep doing its job and keep your printer running smoothly through the busy gift-making season and well into the new year.
The Takeaway
A few targeted upgrades fix the frustrations that make printing feel like hard work. Start with the problem you meet most often, whether that is damp spools or a stubborn first layer, and build from there with a PEI build plate or dryer.
Every upgrade in this guide is made by Flashforge for its own printers, and accessories are 20% off sitewide in its Black Friday sale until November 30.
Plenty more practical guides are just a click away on 2minuteread.
